dmesg - AMD Radeon Vega
Linux version 4.18.8-arch1-1-ARCH (builduser@heftig-15200) (gcc version 8.2.1 20180831 (GCC)) #1 SMP PREEMPT Sat Sep 15 20:34:48 UTC 2018
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000085fff] usable
BIOS-e820: [mem 0x0000000000086000-0x0000000000086fff] ACPI NVS
BIOS-e820: [mem 0x0000000000087000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009bfffff] usable
BIOS-e820: [mem 0x0000000009c00000-0x0000000009cd0fff] reserved
BIOS-e820: [mem 0x0000000009cd1000-0x0000000009efffff] usable
BIOS-e820: [mem 0x0000000009f00000-0x0000000009f09fff] ACPI NVS
BIOS-e820: [mem 0x0000000009f0a000-0x00000000674edfff] usable
BIOS-e820: [mem 0x00000000674ee000-0x00000000676edfff] type 20
BIOS-e820: [mem 0x00000000676ee000-0x000000006ae9cfff] reserved
BIOS-e820: [mem 0x000000006ae9d000-0x000000006ce9cfff] ACPI NVS
BIOS-e820: [mem 0x000000006ce9d000-0x000000006cf1cfff] ACPI data
BIOS-e820: [mem 0x000000006cf1d000-0x000000006cf1efff] usable
BIOS-e820: [mem 0x000000006cf1f000-0x000000006d321fff] reserved
BIOS-e820: [mem 0x000000006d322000-0x000000006effffff] usable
BIOS-e820: [mem 0x000000006f000000-0x000000006fffffff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000084f33ffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.60 by Lenovo
efi: ACPI=0x6cf1c000 ACPI 2.0=0x6cf1c014 SMBIOS=0x68609000 SMBIOS 3.0=0x68606000 ESRT=0x68557000 MEMATTR=0x63746018
SMBIOS 3.1.1 present.
DMI: LENOVO 20MU000SUS/20MU000SUS, BIOS R0WET34W (1.02 ) 07/05/2018
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x84f340 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFE0000000 write-back
2 base 0000A0000000 mask FFFFF0000000 write-back
3 base 0000FF000000 mask FFFFFF000000 write-protect
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000850000000 aka 34048M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x6f000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x0000000068557000 to 0x0000000068557088.
Scanning 1 areas for low memory corruption
Base memory trampoline at [(____ptrval____)] 99000 size 24576
Using GB pages for direct mapping
BRK [0x4002a1000, 0x4002a1fff] PGTABLE
BRK [0x4002a2000, 0x4002a2fff] PGTABLE
BRK [0x4002a3000, 0x4002a3fff] PGTABLE
BRK [0x4002a4000, 0x4002a4fff] PGTABLE
BRK [0x4002a5000, 0x4002a5fff] PGTABLE
BRK [0x4002a6000, 0x4002a6fff] PGTABLE
BRK [0x4002a7000, 0x4002a7fff] PGTABLE
BRK [0x4002a8000, 0x4002a8fff] PGTABLE
BRK [0x4002a9000, 0x4002a9fff] PGTABLE
BRK [0x4002aa000, 0x4002aafff] PGTABLE
BRK [0x4002ab000, 0x4002abfff] PGTABLE
BRK [0x4002ac000, 0x4002acfff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x36fc7000-0x377dafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000006CF1C014 000024 (v02 LENOVO)
ACPI: XSDT 0x000000006CEE5188 0000E4 (v01 LENOVO TP-R0W 00001020 PTEC 00000002)
ACPI: FACP 0x000000006CF0B000 00010C (v05 LENOVO TP-R0W 00001020 PTEC 00000002)
ACPI: DSDT 0x000000006CEFA000 00C8FF (v01 LENOVO TP-R0W 00001020 INTL 20120711)
ACPI: FACS 0x000000006CE3D000 000040
ACPI: SSDT 0x000000006CF15000 005367 (v02 LENOVO TP-R0W 00000002 MSFT 02000002)
ACPI: SSDT 0x000000006CF13000 00119C (v01 LENOVO TP-R0W 00000001 AMD 00000001)
ACPI: CRAT 0x000000006CF12000 000810 (v01 LENOVO TP-R0W 00001020 PTEC 00000002)
ACPI: CDIT 0x000000006CF11000 000029 (v01 LENOVO TP-R0W 00001020 PTEC 00000002)
ACPI: SSDT 0x000000006CF10000 0003FE (v02 LENOVO Tpm2Tabl 00001000 INTL 20120711)
ACPI: TPM2 0x000000006CF0F000 000034 (v03 LENOVO TP-R0W 00001020 PTEC 00000002)
ACPI: UEFI 0x000000006CE40000 000042 (v01 LENOVO TP-R0W 00001020 PTEC 00000002)
ACPI: MSDM 0x000000006CF0E000 000055 (v03 LENOVO TP-R0W 00001020 PTEC 00000002)
ACPI: SLIC 0x000000006CF0D000 000176 (v01 LENOVO TP-R0W 00001020 PTEC 00000002)
ACPI: BATB 0x000000006CF0C000 00004A (v02 LENOVO TP-R0W 00001020 PTEC 00000002)
ACPI: HPET 0x000000006CF0A000 000038 (v01 LENOVO TP-R0W 00001020 PTEC 00000002)
ACPI: APIC 0x000000006CF09000 000138 (v02 LENOVO TP-R0W 00001020 PTEC 00000002)
ACPI: MCFG 0x000000006CF08000 00003C (v01 LENOVO TP-R0W 00001020 PTEC 00000002)
ACPI: SBST 0x000000006CF07000 000030 (v01 LENOVO TP-R0W 00001020 PTEC 00000002)
ACPI: VFCT 0x000000006CEEC000 00D484 (v01 LENOVO TP-R0W 00001020 PTEC 00000002)
ACPI: IVRS 0x000000006CEEB000 0000D0 (v02 LENOVO TP-R0W 00001020 PTEC 00000002)
ACPI: FPDT 0x000000006CEEA000 000044 (v01 LENOVO TP-R0W 00001020 PTEC 00000002)
ACPI: SSDT 0x000000006CEE9000 000EEB (v01 LENOVO TP-R0W 00000001 INTL 20120711)
ACPI: SSDT 0x000000006CEE8000 0008AA (v01 LENOVO TP-R0W 00000001 INTL 20120711)
ACPI: SSDT 0x000000006CEE6000 001AD6 (v01 LENOVO TP-R0W 00000001 INTL 20120711)
ACPI: BGRT 0x000000006CF1B000 000038 (v01 LENOVO TP-R0W 00001020 PTEC 00000002)
ACPI: UEFI 0x000000006CE3C000 0000B2 (v01 LENOVO TP-R0W 00001020 PTEC 00000002)
ACPI: SSDT 0x000000006CEE3000 00118E (v01 LENOVO TP-R0W 00000001 INTL 20120711)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000084f33ffff]
NODE_DATA(0) allocated [mem 0x84f33c000-0x84f33ffff]
tsc: Fast TSC calibration using PIT
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000084f33ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000085fff]
node 0: [mem 0x0000000000087000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x0000000009bfffff]
node 0: [mem 0x0000000009cd1000-0x0000000009efffff]
node 0: [mem 0x0000000009f0a000-0x00000000674edfff]
node 0: [mem 0x000000006cf1d000-0x000000006cf1efff]
node 0: [mem 0x000000006d322000-0x000000006effffff]
node 0: [mem 0x0000000100000000-0x000000084f33ffff]
Reserved but unavailable: 28528 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000084f33ffff]
On node 0 totalpages: 8094672
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 6660 pages used for memmap
DMA32 zone: 426227 pages, LIFO batch:31
Normal zone: 119757 pages used for memmap
Normal zone: 7664448 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
IOAPIC[0]: apic_id 32, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 33, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00086000-0x00086fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x09c00000-0x09cd0fff]
PM: Registered nosave memory: [mem 0x09f00000-0x09f09fff]
PM: Registered nosave memory: [mem 0x674ee000-0x676edfff]
PM: Registered nosave memory: [mem 0x676ee000-0x6ae9cfff]
PM: Registered nosave memory: [mem 0x6ae9d000-0x6ce9cfff]
PM: Registered nosave memory: [mem 0x6ce9d000-0x6cf1cfff]
PM: Registered nosave memory: [mem 0x6cf1f000-0x6d321fff]
PM: Registered nosave memory: [mem 0x6f000000-0x6fffffff]
PM: Registered nosave memory: [mem 0x70000000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
PM: Registered nosave memory: [mem 0xfed81000-0xffffffff]
[mem 0x70000000-0xfed7ffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144
pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists, mobility grouping on. Total pages: 7968169
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 31677340K/32378688K available (10252K kernel code, 1335K rwdata, 3608K rodata, 1504K init, 636K bss, 701348K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 34439 entries in 135 pages
Preemptible hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
RCU priority boosting: priority 1 delay 500 ms.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16
Offload RCU callbacks from CPUs: (none).
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20180531
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration using PIT
tsc: Detected 2195.755 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa688e3507, max_idle_ns: 440795260522 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4393.48 BogoMIPS (lpj=7319183)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
mce: CPU supports 23 MCE banks
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 28K
smpboot: CPU0: AMD Ryzen 7 PRO 2700U w/ Radeon Vega Mobile Gfx (family: 0x17, model: 0x11, stepping: 0x0)
Performance Events: Fam17h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 3348846424 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
do_IRQ: 1.55 No irq handler for vector
#2
do_IRQ: 2.55 No irq handler for vector
#3
do_IRQ: 3.55 No irq handler for vector
#4
do_IRQ: 4.55 No irq handler for vector
#5
do_IRQ: 5.55 No irq handler for vector
#6
do_IRQ: 6.55 No irq handler for vector
#7
do_IRQ: 7.55 No irq handler for vector
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 8 processors activated (35146.91 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x00086000-0x00086fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x09f00000-0x09f09fff] (40960 bytes)
PM: Registering ACPI NVS region [mem 0x6ae9d000-0x6ce9cfff] (33554432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 10:08:46, date: 09/20/18
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1537438125.383:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: Power Resource [PUBS] (on)
ACPI: Power Resource [P0ST] (on)
ACPI: Power Resource [P3ST] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c1fff window]
pci_bus 0000:00: root bus resource [mem 0x000c2000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c5fff window]
pci_bus 0000:00: root bus resource [mem 0x000c6000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000c9fff window]
pci_bus 0000:00: root bus resource [mem 0x000ca000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cdfff window]
pci_bus 0000:00: root bus resource [mem 0x000ce000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d1fff window]
pci_bus 0000:00: root bus resource [mem 0x000d2000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d5fff window]
pci_bus 0000:00: root bus resource [mem 0x000d6000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000d9fff window]
pci_bus 0000:00: root bus resource [mem 0x000da000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000ddfff window]
pci_bus 0000:00: root bus resource [mem 0x000de000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfdffffff window]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.1: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:01.3: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:01.4: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.4: PME# supported from D0 D3hot D3cold
pci 0000:00:01.5: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.5: PME# supported from D0 D3hot D3cold
pci 0000:00:01.6: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.6: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
pci 0000:00:08.2: enabling Extended Tags
pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
pci 0000:01:00.0: [10ec:522a] type 00 class 0xff0000
pci 0000:01:00.0: reg 0x10: [mem 0xc0c00000-0xc0c00fff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xc0c00000-0xc0cfffff]
pci 0000:02:00.0: [8086:2526] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xc0b00000-0xc0b03fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.2: PCI bridge to [bus 02]
pci 0000:00:01.2: bridge window [mem 0xc0b00000-0xc0bfffff]
pci 0000:03:00.0: [144d:a808] type 00 class 0x010802
pci 0000:03:00.0: reg 0x10: [mem 0xc0a00000-0xc0a03fff 64bit]
pci 0000:00:01.3: PCI bridge to [bus 03]
pci 0000:00:01.3: bridge window [mem 0xc0a00000-0xc0afffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0x3400-0x34ff]
pci 0000:04:00.0: reg 0x18: [mem 0xc0914000-0xc0914fff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0xc0900000-0xc0903fff 64bit]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.1: [10ec:816a] type 00 class 0x070002
pci 0000:04:00.1: reg 0x10: [io 0x3200-0x32ff]
pci 0000:04:00.1: reg 0x18: [mem 0xc0915000-0xc0915fff 64bit]
pci 0000:04:00.1: reg 0x20: [mem 0xc0904000-0xc0907fff 64bit]
pci 0000:04:00.1: supports D1 D2
pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.2: [10ec:816b] type 00 class 0x070002
pci 0000:04:00.2: reg 0x10: [io 0x3100-0x31ff]
pci 0000:04:00.2: reg 0x18: [mem 0xc0916000-0xc0916fff 64bit]
pci 0000:04:00.2: reg 0x20: [mem 0xc0908000-0xc090bfff 64bit]
pci 0000:04:00.2: supports D1 D2
pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.3: [10ec:816c] type 00 class 0x0c0701
pci 0000:04:00.3: reg 0x10: [io 0x3000-0x30ff]
pci 0000:04:00.3: reg 0x18: [mem 0xc0917000-0xc0917fff 64bit]
pci 0000:04:00.3: reg 0x20: [mem 0xc090c000-0xc090ffff 64bit]
pci 0000:04:00.3: supports D1 D2
pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.4: [10ec:816d] type 00 class 0x0c0320
pci 0000:04:00.4: reg 0x10: [mem 0xc0918000-0xc0918fff]
pci 0000:04:00.4: reg 0x18: [mem 0xc0910000-0xc0913fff 64bit]
pci 0000:04:00.4: PME# supported from D0 D3cold
pci 0000:00:01.4: PCI bridge to [bus 04]
pci 0000:00:01.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.4: bridge window [mem 0xc0900000-0xc09fffff]
pci 0000:05:00.0: [1179:0113] type 00 class 0x010802
pci 0000:05:00.0: reg 0x10: [mem 0xc0800000-0xc0803fff 64bit]
pci 0000:05:00.0: PME# supported from D0 D3hot
pci 0000:00:01.5: PCI bridge to [bus 05]
pci 0000:00:01.5: bridge window [mem 0xc0800000-0xc08fffff]
pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:06:00.0: reg 0x18: [mem 0xc0704000-0xc0704fff 64bit]
pci 0000:06:00.0: reg 0x20: [mem 0xc0700000-0xc0703fff 64bit]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:01.6: PCI bridge to [bus 06]
pci 0000:00:01.6: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.6: bridge window [mem 0xc0700000-0xc07fffff]
pci 0000:07:00.0: [1002:15dd] type 00 class 0x030000
pci 0000:07:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:07:00.0: reg 0x18: [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:07:00.0: reg 0x20: [io 0x1000-0x10ff]
pci 0000:07:00.0: reg 0x24: [mem 0xc0600000-0xc067ffff]
pci 0000:07:00.0: enabling Extended Tags
pci 0000:07:00.0: BAR 0: assigned to efifb
pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:07:00.1: [1002:15de] type 00 class 0x040300
pci 0000:07:00.1: reg 0x10: [mem 0xc0688000-0xc068bfff]
pci 0000:07:00.1: enabling Extended Tags
pci 0000:07:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:07:00.2: [1022:15df] type 00 class 0x108000
pci 0000:07:00.2: reg 0x18: [mem 0xc0500000-0xc05fffff]
pci 0000:07:00.2: reg 0x24: [mem 0xc068c000-0xc068dfff]
pci 0000:07:00.2: enabling Extended Tags
pci 0000:07:00.3: [1022:15e0] type 00 class 0x0c0330
pci 0000:07:00.3: reg 0x10: [mem 0xc0300000-0xc03fffff 64bit]
pci 0000:07:00.3: enabling Extended Tags
pci 0000:07:00.3: PME# supported from D0 D3hot D3cold
pci 0000:07:00.4: [1022:15e1] type 00 class 0x0c0330
pci 0000:07:00.4: reg 0x10: [mem 0xc0400000-0xc04fffff 64bit]
pci 0000:07:00.4: enabling Extended Tags
pci 0000:07:00.4: PME# supported from D0 D3hot D3cold
pci 0000:07:00.6: [1022:15e3] type 00 class 0x040300
pci 0000:07:00.6: reg 0x10: [mem 0xc0680000-0xc0687fff]
pci 0000:07:00.6: enabling Extended Tags
pci 0000:07:00.6: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 07]
pci 0000:00:08.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:08.1: bridge window [mem 0xc0300000-0xc06fffff]
pci 0000:00:08.1: bridge window [mem 0xb0000000-0xc01fffff 64bit pref]
pci 0000:08:00.0: [1022:7901] type 00 class 0x010601
pci 0000:08:00.0: reg 0x24: [mem 0xc0200000-0xc02007ff]
pci 0000:08:00.0: enabling Extended Tags
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.2: PCI bridge to [bus 08]
pci 0000:00:08.2: bridge window [mem 0xc0200000-0xc02fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: IRQ 7 override to edge, high
platform USBC000:00: failed to claim resource 0: [mem 0x6ce9c764-0x6ce9d763]
acpi USBC000:00: platform device creation failed: -16
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:07:00.0: vgaarb: bridge control possible
pci 0000:07:00.0: vgaarb: setting as boot device
vgaarb: loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x09c00000-0x0bffffff]
e820: reserve RAM buffer [mem 0x09f00000-0x0bffffff]
e820: reserve RAM buffer [mem 0x674ee000-0x67ffffff]
e820: reserve RAM buffer [mem 0x6cf1f000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6f000000-0x6fffffff]
e820: reserve RAM buffer [mem 0x84f340000-0x84fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io 0x0f50-0x0f51] has been reserved
system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0530-0x0537] has been reserved
system 00:02: [io 0x0400-0x0427] has been reserved
system 00:02: [io 0x0430] has been reserved
system 00:02: [io 0x0440-0x0447] has been reserved
system 00:02: [io 0x0b00-0x0b1f] has been reserved
system 00:02: [io 0x0b20-0x0b3f] has been reserved
system 00:02: [io 0x0c00-0x0c01] has been reserved
system 00:02: [io 0x0c14] has been reserved
system 00:02: [io 0x0c50-0x0c52] has been reserved
system 00:02: [io 0x0cd0-0x0cd1] has been reserved
system 00:02: [io 0x0cd2-0x0cd3] has been reserved
system 00:02: [io 0x0cd4-0x0cd5] has been reserved
system 00:02: [io 0x0cd6-0x0cd7] has been reserved
system 00:02: [io 0x0cd8-0x0cdf] has been reserved
system 00:02: [io 0x0cf9] could not be reserved
system 00:02: [io 0x8100-0x81ff window] has been reserved
system 00:02: [io 0x8200-0x82ff window] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:03: [mem 0xff000000-0xffffffff] has been reserved
system 00:03: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:03: [mem 0xfed61000-0xfed613ff] has been reserved
system 00:03: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:04: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs LEN2056 PNP0f13 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xc0c00000-0xc0cfffff]
pci 0000:00:01.2: PCI bridge to [bus 02]
pci 0000:00:01.2: bridge window [mem 0xc0b00000-0xc0bfffff]
pci 0000:00:01.3: PCI bridge to [bus 03]
pci 0000:00:01.3: bridge window [mem 0xc0a00000-0xc0afffff]
pci 0000:00:01.4: PCI bridge to [bus 04]
pci 0000:00:01.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.4: bridge window [mem 0xc0900000-0xc09fffff]
pci 0000:00:01.5: PCI bridge to [bus 05]
pci 0000:00:01.5: bridge window [mem 0xc0800000-0xc08fffff]
pci 0000:00:01.6: PCI bridge to [bus 06]
pci 0000:00:01.6: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.6: bridge window [mem 0xc0700000-0xc07fffff]
pci 0000:00:08.1: PCI bridge to [bus 07]
pci 0000:00:08.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:08.1: bridge window [mem 0xc0300000-0xc06fffff]
pci 0000:00:08.1: bridge window [mem 0xb0000000-0xc01fffff 64bit pref]
pci 0000:00:08.2: PCI bridge to [bus 08]
pci 0000:00:08.2: bridge window [mem 0xc0200000-0xc02fffff]
pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 5 [mem 0x000c0000-0x000c1fff window]
pci_bus 0000:00: resource 6 [mem 0x000c2000-0x000c3fff window]
pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000c5fff window]
pci_bus 0000:00: resource 8 [mem 0x000c6000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000c9fff window]
pci_bus 0000:00: resource 10 [mem 0x000ca000-0x000cbfff window]
pci_bus 0000:00: resource 11 [mem 0x000cc000-0x000cdfff window]
pci_bus 0000:00: resource 12 [mem 0x000ce000-0x000cffff window]
pci_bus 0000:00: resource 13 [mem 0x000d0000-0x000d1fff window]
pci_bus 0000:00: resource 14 [mem 0x000d2000-0x000d3fff window]
pci_bus 0000:00: resource 15 [mem 0x000d4000-0x000d5fff window]
pci_bus 0000:00: resource 16 [mem 0x000d6000-0x000d7fff window]
pci_bus 0000:00: resource 17 [mem 0x000d8000-0x000d9fff window]
pci_bus 0000:00: resource 18 [mem 0x000da000-0x000dbfff window]
pci_bus 0000:00: resource 19 [mem 0x000dc000-0x000ddfff window]
pci_bus 0000:00: resource 20 [mem 0x000de000-0x000dffff window]
pci_bus 0000:00: resource 21 [mem 0xb0000000-0xf7ffffff window]
pci_bus 0000:00: resource 22 [mem 0xfc000000-0xfdffffff window]
pci_bus 0000:00: resource 23 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 24 [io 0x0d00-0xffff window]
pci_bus 0000:01: resource 1 [mem 0xc0c00000-0xc0cfffff]
pci_bus 0000:02: resource 1 [mem 0xc0b00000-0xc0bfffff]
pci_bus 0000:03: resource 1 [mem 0xc0a00000-0xc0afffff]
pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xc0900000-0xc09fffff]
pci_bus 0000:05: resource 1 [mem 0xc0800000-0xc08fffff]
pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:06: resource 1 [mem 0xc0700000-0xc07fffff]
pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:07: resource 1 [mem 0xc0300000-0xc06fffff]
pci_bus 0000:07: resource 2 [mem 0xb0000000-0xc01fffff 64bit pref]
pci_bus 0000:08: resource 1 [mem 0xc0200000-0xc02fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:04:00.4: enabling device (0000 -> 0002)
pci 0000:07:00.1: Linked as a consumer to 0000:07:00.0
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 8272K
AMD-Vi: Unable to write to IOMMU perf counter.
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
iommu: Adding device 0000:00:01.0 to group 0
iommu: Adding device 0000:00:01.1 to group 1
iommu: Adding device 0000:00:01.2 to group 2
iommu: Adding device 0000:00:01.3 to group 3
iommu: Adding device 0000:00:01.4 to group 4
iommu: Adding device 0000:00:01.5 to group 5
iommu: Adding device 0000:00:01.6 to group 6
iommu: Adding device 0000:00:08.0 to group 7
iommu: Adding device 0000:00:08.1 to group 7
iommu: Adding device 0000:00:08.2 to group 7
iommu: Adding device 0000:00:14.0 to group 8
iommu: Adding device 0000:00:14.3 to group 8
iommu: Adding device 0000:00:18.0 to group 9
iommu: Adding device 0000:00:18.1 to group 9
iommu: Adding device 0000:00:18.2 to group 9
iommu: Adding device 0000:00:18.3 to group 9
iommu: Adding device 0000:00:18.4 to group 9
iommu: Adding device 0000:00:18.5 to group 9
iommu: Adding device 0000:00:18.6 to group 9
iommu: Adding device 0000:00:18.7 to group 9
iommu: Adding device 0000:01:00.0 to group 10
iommu: Adding device 0000:02:00.0 to group 11
iommu: Adding device 0000:03:00.0 to group 12
iommu: Adding device 0000:04:00.0 to group 13
iommu: Adding device 0000:04:00.1 to group 13
iommu: Adding device 0000:04:00.2 to group 13
iommu: Adding device 0000:04:00.3 to group 13
iommu: Adding device 0000:04:00.4 to group 13
iommu: Adding device 0000:05:00.0 to group 14
iommu: Adding device 0000:06:00.0 to group 15
iommu: Adding device 0000:07:00.0 to group 7
iommu: Adding device 0000:07:00.1 to group 7
iommu: Adding device 0000:07:00.2 to group 7
iommu: Adding device 0000:07:00.3 to group 7
iommu: Adding device 0000:07:00.4 to group 7
iommu: Adding device 0000:07:00.6 to group 7
iommu: Adding device 0000:08:00.0 to group 7
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0x4f77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=41 max_order=23 bucket_order=0
zbud: loaded
pstore: using lz4hc compression
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:01.1: AER enabled with IRQ 26
pcieport 0000:00:01.2: AER enabled with IRQ 27
pcieport 0000:00:01.3: AER enabled with IRQ 28
pcieport 0000:00:01.4: AER enabled with IRQ 29
pcieport 0000:00:01.5: AER enabled with IRQ 30
pcieport 0000:00:01.6: AER enabled with IRQ 31
pcieport 0000:00:01.1: Signaling PME with IRQ 26
pcieport 0000:00:01.2: Signaling PME with IRQ 27
pcieport 0000:00:01.3: Signaling PME with IRQ 28
pcieport 0000:00:01.4: Signaling PME with IRQ 29
pcieport 0000:00:01.5: Signaling PME with IRQ 30
pcieport 0000:00:01.6: Signaling PME with IRQ 31
pcieport 0000:00:08.1: Signaling PME with IRQ 32
pcieport 0000:00:08.2: Signaling PME with IRQ 33
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xb0000000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
acpi device:09: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/LNXVIDEO:00/input/input4
Monitor-Mwait will be used to enter C-1 state
serial 0000:04:00.1: enabling device (0000 -> 0003)
serial 0000:04:00.2: enabling device (0000 -> 0003)
nvme nvme0: pci function 0000:03:00.0
nvme nvme1: pci function 0000:05:00.0
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08101007
microcode: CPU1: patch_level=0x08101007
microcode: CPU2: patch_level=0x08101007
microcode: CPU3: patch_level=0x08101007
microcode: CPU4: patch_level=0x08101007
microcode: CPU5: patch_level=0x08101007
microcode: CPU6: patch_level=0x08101007
microcode: CPU7: patch_level=0x08101007
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 86fb7c334b88f78c14d1494ca718f1a1c4b4dbfd'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Magic number: 2:645:123
acpi LNXSYBUS:01: hash matches
rtc_cmos 00:01: setting system clock to 2018-09-20 10:08:46 UTC (1537438126)
Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
nvme nvme0: Shutdown timeout set to 8 seconds
nvme nvme1: allocated 38 MiB host memory buffer.
nvme0n1: p1 p2 p3 p4 p5
nvme1n1: p1 p2 p3 p4
Freeing unused kernel image memory: 1504K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 488K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MOU] at 0x60,0x64 irq 1,12
rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:04:00.4: EHCI Host Controller
ehci-pci 0000:04:00.4: new USB bus registered, assigned bus number 1
ehci-pci 0000:04:00.4: irq 72, io mem 0xc0918000
libata version 3.00 loaded.
ahci 0000:08:00.0: version 3.0
ahci 0000:08:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part deso sadm sds
scsi host0: ahci
ata1: SATA max UDMA/133 abar m2048@0xc0200000 port 0xc0200100 irq 75
ehci-pci 0000:04:00.4: USB 0.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.18.8-arch1-1-ARCH ehci_hcd
usb usb1: SerialNumber: 0000:04:00.4
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci_hcd 0000:07:00.3: xHCI Host Controller
xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 2
xhci_hcd 0000:07:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000040000410
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.18.8-arch1-1-ARCH xhci-hcd
usb usb2: SerialNumber: 0000:07:00.3
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:07:00.3: xHCI Host Controller
xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:07:00.3: Host supports USB 3.10 Enhanced SuperSpeed
usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.18.8-arch1-1-ARCH xhci-hcd
usb usb3: SerialNumber: 0000:07:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:07:00.4: xHCI Host Controller
xhci_hcd 0000:07:00.4: new USB bus registered, assigned bus number 4
xhci_hcd 0000:07:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000040000410
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.18.8-arch1-1-ARCH xhci-hcd
usb usb4: SerialNumber: 0000:07:00.4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.4: xHCI Host Controller
xhci_hcd 0000:07:00.4: new USB bus registered, assigned bus number 5
xhci_hcd 0000:07:00.4: Host supports USB 3.10 Enhanced SuperSpeed
usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.18.8-arch1-1-ARCH xhci-hcd
usb usb5: SerialNumber: 0000:07:00.4
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
ata1: SATA link down (SStatus 0 SControl 300)
usb 2-2: new high-speed USB device number 2 using xhci_hcd
usb 4-1: new high-speed USB device number 2 using xhci_hcd
random: fast init done
EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
usb 2-2: New USB device found, idVendor=0781, idProduct=5571, bcdDevice= 1.00
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: Cruzer Fit
usb 2-2: Manufacturer: SanDisk
usb 2-2: SerialNumber: 4C530001200324120472
usb 4-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.52
usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 4-1: Product: USB2.0 Hub
systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 4 ports detected
systemd[1]: Set hostname to .
usb 3-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on udev Kernel Socket.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on LVM2 poll daemon socket.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on Journal Socket (/dev/log).
usb 3-3: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.24
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB3.0 Hub
usb 3-3: Manufacturer: GenesysLogic
acpi_call: loading out-of-tree module taints kernel.
acpi_call: module verification failed: signature and/or required key missing - tainting kernel
thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffff0
thinkpad_ec: initial ec test failed
EXT4-fs (nvme0n1p3): re-mounted. Opts: (null)
hub 3-3:1.0: USB hub found
hub 3-3:1.0: 4 ports detected
audit: type=1130 audit(1537438127.813:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1537438127.823:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
audit: type=1130 audit(1537438127.826:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1537438127.833:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1537438127.839:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1537438127.866:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1537438127.869:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1537438127.869:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 4-2: new high-speed USB device number 3 using xhci_hcd
systemd-journald[273]: Received request to flush runtime journal from PID 1
usb 2-3: new high-speed USB device number 3 using xhci_hcd
acpi_cpufreq: overriding BIOS provided _PSD data
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
cmi: probe of SMB0001:00 failed with error -5
ACPI: AC Adapter [AC] (on-line)
ipmi message handler version 39.2
ACPI: Battery Slot [BAT0] (battery present)
ipmi device interface
tpm_tis STM7304:00: 2.0 TPM (device-id 0x0, rev-id 78)
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
input: PC Speaker as /devices/platform/pcspkr/input/input8
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
sp5100-tco sp5100-tco: Watchdog hardware is disabled
IPMI System Interface driver.
ipmi_si: Unable to find any System Interface(s)
Non-volatile memory driver v1.3
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.0: enabling device (0005 -> 0007)
thinkpad_acpi: ThinkPad ACPI Extras v0.26
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS R0WET34W (1.02 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad A485, model 20MU000SUS
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
audit: type=1130 audit(1537438128.016:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 4-2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.52
usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 4-2: Product: USB2.0 Hub
cryptd: max_cpu_qlen set to 1000
cfg80211: Loading compiled-in X.509 certificates for regulatory database
r8169 0000:04:00.0 eth0: RTL8168ep/8111ep, 8c:16:45:98:c9:61, XID 50200800, IRQ 94
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:06:00.0: enabling device (0000 -> 0003)
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
usb 2-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.24
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: USB2.0 Hub
usb 2-3: Manufacturer: GenesysLogic
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
mmc0: cannot verify signal voltage switch
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
r8169 0000:06:00.0 eth1: RTL8168g/8111g, 8c:16:45:98:c9:60, XID 50900800, IRQ 96
r8169 0000:06:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
hub 4-2:1.0: USB hub found
hub 4-2:1.0: 4 ports detected
r8169 0000:04:00.0 enp4s0f0: renamed from eth0
Adding 4194300k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:4194300k SSFS
r8169 0000:06:00.0 enp6s0: renamed from eth1
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
usb 4-1.1: new full-speed USB device number 4 using xhci_hcd
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
thinkpad_acpi: battery 1 registered (start 95, stop 100)
battery: new extension: ThinkPad Battery Extension
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
iwlwifi 0000:02:00.0: loaded firmware version 38.c0e03d94.0 op_mode iwlmvm
thinkpad_acpi: battery 2 registered (start 95, stop 100)
ACPI: Battery Slot [BAT1] (battery present)
mmc0: new ultra high speed SDR104 SDXC card at address aaaa
EXT4-fs (nvme0n1p1): mounting ext2 file system using the ext4 subsystem
mmcblk0: mmc0:aaaa SC200 183 GiB
EXT4-fs (nvme0n1p1): mounted filesystem without journal. Opts: block_validity,barrier,user_xattr,acl
mmcblk0: p1
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
usb 4-1.1: New USB device found, idVendor=06cb, idProduct=009a, bcdDevice= 1.64
usb 4-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 4-1.1: SerialNumber: f9b7b8866760
FAT-fs (nvme0n1p2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 9260, REV=0x324
iwlwifi 0000:02:00.0: base HW address: 74:e5:f9:3b:6b:d1
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone0: failed to read out thermal zone (-61)
iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
usb 4-2.3: new full-speed USB device number 5 using xhci_hcd
Linux agpgart interface v0.103
usb 2-3.4: new high-speed USB device number 4 using xhci_hcd
snd_hda_intel 0000:07:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:07:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:07:00.6: enabling device (0000 -> 0002)
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:07:00.1/sound/card0/input10
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:07:00.1/sound/card0/input11
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:07:00.1/sound/card0/input12
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC257: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
usb 4-2.3: New USB device found, idVendor=04f3, idProduct=2398, bcdDevice=57.11
usb 4-2.3: New USB device strings: Mfr=4, Product=14, SerialNumber=0
usb 4-2.3: Product: Touchscreen
usb 4-2.3: Manufacturer: ELAN
usb 2-3.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
usb 2-3.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-3.4: Product: USB 2.0 Hub
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.1/0000:07:00.6/sound/card1/input13
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:07:00.6/sound/card1/input14
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:07:00.6/sound/card1/input15
hub 2-3.4:1.0: USB hub found
hub 2-3.4:1.0: 4 ports detected
IPv6: ADDRCONF(NETDEV_UP): enp4s0f0: link is not ready
[drm] amdgpu kernel modesetting enabled.
usb 4-2.4: new high-speed USB device number 6 using xhci_hcd
AMD IOMMUv2 driver by Joerg Roedel
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add APU node [0x0:0x0]
Finished initializing topology
kfd kfd: Initialized module
checking generic (b0000000 7f0000) vs hw (b0000000 10000000)
fb: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
amdgpu 0000:07:00.0: enabling device (0006 -> 0007)
[drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x17AA:0x5122 0xD0).
[drm] register mmio base: 0xC0600000
[drm] register mmio size: 524288
[drm] probing gen 2 caps for device 1022:15db = 700d03/e
[drm] probing mlw for device 1022:15db = 700d03
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
kfd kfd: DID 15dd is missing in supported_devices
kfd kfd: kgd2kfd_probe failed
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
ATOM BIOS: 113-RAVEN-106
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:07:00.0: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used)
amdgpu 0000:07:00.0: GTT: 1024M 0x000000F500000000 - 0x000000F53FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=1024M
[drm] RAM width 128bits DDR4
[TTM] Zone kernel: Available graphics memory: 15923724 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 1024M of VRAM memory ready
[drm] amdgpu: 3072M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[drm] use_doorbell being set to: [true]
[drm] Found VCN firmware Version: 1.73 Family ID: 18
[drm] PSP loading VCN firmware
r8169 0000:04:00.0 enp4s0f0: link down
IPv6: ADDRCONF(NETDEV_UP): enp4s0f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
r8169 0000:06:00.0 enp6s0: link down
r8169 0000:06:00.0 enp6s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
usb 4-2.4: New USB device found, idVendor=5986, idProduct=2113, bcdDevice=54.22
usb 4-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2.4: Product: Integrated Camera
usb 4-2.4: Manufacturer: SunplusIT Inc
psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4690]
usb 2-3.4.1: new low-speed USB device number 5 using xhci_hcd
amdgpu: [powerplay] dpm has been enabled
[drm] Display Core initialized with v3.1.44!
psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..]
psmouse serio1: synaptics: Your touchpad (PNP: LEN2056 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[drm] SADs count is: -2, don't need to read it
[drm] SADs count is: 0, don't need to read it
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.16, id: 0x1e2b1, caps: 0xf028a3/0x940300/0x12e800/0x400000, board id: 3276, fw id: 2762640
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[drm] VCN decode and encode initialized successfully.
[drm] fb mappable at 0x71100000
[drm] vram apper at 0x70000000
[drm] size 14745600
[drm] fb depth is 24
[drm] pitch is 10240
fbcon: amdgpudrmfb (fb0) is primary device
usb 2-3.4.1: New USB device found, idVendor=258a, idProduct=1006, bcdDevice= 1.00
usb 2-3.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.4.1: Product: USB KEYBOARD
usb 2-3.4.1: Manufacturer: SINO WEALTH
Console: switching to colour frame buffer device 240x67
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
mousedev: PS/2 mouse device common for all mice
amdgpu 0000:07:00.0: fb0: amdgpudrmfb frame buffer device
amdgpu 0000:07:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0
amdgpu 0000:07:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0
amdgpu 0000:07:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0
amdgpu 0000:07:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0
amdgpu 0000:07:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0
amdgpu 0000:07:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0
amdgpu 0000:07:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0
amdgpu 0000:07:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0
amdgpu 0000:07:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0
amdgpu 0000:07:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0
amdgpu 0000:07:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1
amdgpu 0000:07:00.0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1
amdgpu 0000:07:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1
amdgpu 0000:07:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1
[drm] Initialized amdgpu 3.26.0 20150101 for 0000:07:00.0 on minor 0
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
usb 2-3.4.2: new high-speed USB device number 6 using xhci_hcd
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
usb 2-3.4.2: New USB device found, idVendor=0d8c, idProduct=0319, bcdDevice= 1.05
usb 2-3.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.4.2: Product: USB Modi Device
usb 2-3.4.2: Manufacturer: Schiit Audio
usb 2-3.4.3: new full-speed USB device number 7 using xhci_hcd
usb-storage 2-2:1.0: USB Mass Storage device detected
scsi host1: usb-storage 2-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 2-3.4.3: New USB device found, idVendor=045e, idProduct=0291, bcdDevice= 1.07
usb 2-3.4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
media: Linux media interface: v0.10
hidraw: raw HID events driver (C) Jiri Kosina
videodev: Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Integrated Camera (5986:2113)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: ELAN Touchscreen Touchscreen as /devices/pci0000:00/0000:00:08.1/0000:07:00.4/usb4/4-2/4-2.3/4-2.3:1.0/0003:04F3:2398.0001/input/input17
input: ELAN Touchscreen as /devices/pci0000:00/0000:00:08.1/0000:07:00.4/usb4/4-2/4-2.3/4-2.3:1.0/0003:04F3:2398.0001/input/input18
input: ELAN Touchscreen as /devices/pci0000:00/0000:00:08.1/0000:07:00.4/usb4/4-2/4-2.3/4-2.3:1.0/0003:04F3:2398.0001/input/input19
hid-generic 0003:04F3:2398.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:07:00.4-2.3/input0
input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb2/2-3/2-3.4/2-3.4.1/2-3.4.1:1.0/0003:258A:1006.0002/input/input21
uvcvideo 4-2.4:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 4-2.4:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 4-2.4:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 4-2.4:1.0: Entity type for entity Camera 1 was not initialized!
input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:08.1/0000:07:00.4/usb4/4-2/4-2.4/4-2.4:1.0/input/input22
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input16
hid-generic 0003:258A:1006.0002: input,hidraw1: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:07:00.3-3.4.1/input0
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: SINO WEALTH USB KEYBOARD System Control as /devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb2/2-3/2-3.4/2-3.4.1/2-3.4.1:1.1/0003:258A:1006.0003/input/input23
input: SINO WEALTH USB KEYBOARD Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb2/2-3/2-3.4/2-3.4.1/2-3.4.1:1.1/0003:258A:1006.0003/input/input24
input: SINO WEALTH USB KEYBOARD Keyboard as /devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb2/2-3/2-3.4/2-3.4.1/2-3.4.1:1.1/0003:258A:1006.0003/input/input26
hid-generic 0003:258A:1006.0003: input,hiddev1,hidraw2: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:07:00.3-3.4.1/input1
hid-generic 0003:0D8C:0319.0004: No inputs registered, leaving
hid-generic 0003:0D8C:0319.0004: hidraw3: USB HID v1.00 Device [Schiit Audio USB Modi Device] on usb-0000:07:00.3-3.4.2/input2
usb 2-3.4.4: new full-speed USB device number 8 using xhci_hcd
input: ELAN Touchscreen as /devices/pci0000:00/0000:00:08.1/0000:07:00.4/usb4/4-2/4-2.3/4-2.3:1.0/0003:04F3:2398.0001/input/input28
hid-multitouch 0003:04F3:2398.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:07:00.4-2.3/input0
usb 2-3.4.4: New USB device found, idVendor=1b1c, idProduct=1b2e, bcdDevice= 2.06
usb 2-3.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.4.4: Product: Corsair Gaming M65 Pro RGB Mouse
usb 2-3.4.4: Manufacturer: Corsair
usb 2-3.4.4: SerialNumber: 01029006AF1E19075A252E22F5001BC0
input: Corsair Corsair Gaming M65 Pro RGB Mouse as /devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb2/2-3/2-3.4/2-3.4.4/2-3.4.4:1.0/0003:1B1C:1B2E.0005/input/input32
hid-generic 0003:1B1C:1B2E.0005: input,hidraw4: USB HID v1.11 Mouse [Corsair Corsair Gaming M65 Pro RGB Mouse] on usb-0000:07:00.3-3.4.4/input0
input: Corsair Corsair Gaming M65 Pro RGB Mouse Mouse as /devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb2/2-3/2-3.4/2-3.4.4/2-3.4.4:1.1/0003:1B1C:1B2E.0006/input/input33
input: Corsair Corsair Gaming M65 Pro RGB Mouse Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb2/2-3/2-3.4/2-3.4.4/2-3.4.4:1.1/0003:1B1C:1B2E.0006/input/input34
scsi 1:0:0:0: Direct-Access SanDisk Cruzer Fit 1.00 PQ: 0 ANSI: 6
input: Corsair Corsair Gaming M65 Pro RGB Mouse as /devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb2/2-3/2-3.4/2-3.4.4/2-3.4.4:1.1/0003:1B1C:1B2E.0006/input/input35
input: Corsair Corsair Gaming M65 Pro RGB Mouse as /devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb2/2-3/2-3.4/2-3.4.4/2-3.4.4:1.1/0003:1B1C:1B2E.0006/input/input36
hid-generic 0003:1B1C:1B2E.0006: input,hiddev2,hidraw5: USB HID v1.11 Mouse [Corsair Corsair Gaming M65 Pro RGB Mouse] on usb-0000:07:00.3-3.4.4/input1
usbhid 2-3.4.4:1.2: couldn't find an input interrupt endpoint
sd 1:0:0:0: [sda] 30842880 512-byte logical blocks: (15.8 GB/14.7 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 1:0:0:0: [sda] Attached SCSI removable disk
usbcore: registered new interface driver xpad
r8169 0000:06:00.0 enp6s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
usbcore: registered new interface driver snd-usb-audio
kauditd_printk_skb: 32 callbacks suppressed
audit: type=1131 audit(1537438133.389:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1537438134.739:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-wait-online comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
audit: type=1325 audit(1537438135.049:41): table=nat family=2 entries=0
audit: type=1300 audit(1537438135.049:41): arch=c000003e syscall=175 success=yes exit=0 a0=56502b8986a0 a1=24c9 a2=5650294a7de6 a3=56502b083010 items=0 ppid=7 pid=1160 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/usr/bin/kmod" key=(null)
audit: type=1327 audit(1537438135.049:41): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F6E6174
audit: type=1325 audit(1537438135.086:42): table=nat family=2 entries=5
audit: type=1300 audit(1537438135.086:42): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=55c9eb4f1a50 items=0 ppid=1107 pid=1182 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/bin/xtables-legacy-multi" key=(null)
audit: type=1327 audit(1537438135.086:42): proctitle=2F7573722F62696E2F69707461626C6573002D2D77616974002D74006E6174002D4E00444F434B4552
audit: type=1325 audit(1537438135.089:43): table=filter family=2 entries=4
audit: type=1300 audit(1537438135.089:43): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=559666b0e930 items=0 ppid=1107 pid=1184 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/bin/xtables-legacy-multi" key=(null)
Initializing XFRM netlink socket
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffff0
thinkpad_ec: initial ec test failed
thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffff0
thinkpad_ec: initial ec test failed
kauditd_printk_skb: 114 callbacks suppressed
audit: type=1131 audit(1537438138.809:83): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1537438158.656:84): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1006 audit(1537438159.039:85): pid=720 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
audit: type=1130 audit(1537438159.049:86): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1006 audit(1537438159.059:87): pid=1579 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
audit: type=1130 audit(1537438159.116:88): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
NET: Registered protocol family 38
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
fuse init (API version 7.27)
audit: type=1130 audit(1537438220.349:89): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
tun: Universal TUN/TAP device driver, 1.6
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
audit: type=1130 audit(1537438460.481:90): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1537438470.804:91): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
audit: type=1130 audit(1537439041.454:92): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1537439041.454:93): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
usb 2-3.2: new high-speed USB device number 9 using xhci_hcd
usb 2-3.2: New USB device found, idVendor=18d1, idProduct=4ee7, bcdDevice= 3.18
usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.2: Product: Pixel
usb 2-3.2: Manufacturer: Google
usb 2-3.2: SerialNumber: FA6AA0302820
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
audit: type=1130 audit(1537445830.261:94): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1537445860.347:95): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
usb 2-3.2: USB disconnect, device number 9
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
usb 2-3.2: new high-speed USB device number 10 using xhci_hcd
usb 2-3.2: New USB device found, idVendor=18d1, idProduct=4ee7, bcdDevice= 3.18
usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.2: Product: Pixel
usb 2-3.2: Manufacturer: Google
usb 2-3.2: SerialNumber: FA6AA0302820
audit: type=1130 audit(1537452231.295:96): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1537452241.812:97): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1537452259.069:98): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1537452269.819:99): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
usb 2-3.2: USB disconnect, device number 10
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
usb 2-3.2: new high-speed USB device number 11 using xhci_hcd
usb 2-3.2: New USB device found, idVendor=18d1, idProduct=4ee7, bcdDevice= 3.18
usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.2: Product: Pixel
usb 2-3.2: Manufacturer: Google
usb 2-3.2: SerialNumber: FA6AA0302820
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
audit: type=1130 audit(1537464124.520:100): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1537464134.817:101): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
usb 2-3.2: USB disconnect, device number 11
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
usb 2-3.2: new high-speed USB device number 12 using xhci_hcd
usb 2-3.2: New USB device found, idVendor=18d1, idProduct=4ee7, bcdDevice= 3.18
usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.2: Product: Pixel
usb 2-3.2: Manufacturer: Google
usb 2-3.2: SerialNumber: FA6AA0302820
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
usb 2-3.2: USB disconnect, device number 12
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
usb 2-3.2: new high-speed USB device number 13 using xhci_hcd
usb 2-3.2: New USB device found, idVendor=18d1, idProduct=4ee7, bcdDevice= 3.18
usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.2: Product: Pixel
usb 2-3.2: Manufacturer: Google
usb 2-3.2: SerialNumber: FA6AA0302820
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
amdgpu: [powerplay] pp_dpm_get_sclk_od was not implemented.
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
usb 2-3.2: USB disconnect, device number 13
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready